Includes Soundminer metadata, bonus spec sheet, and many 4-channel files.
10 inch Craftsman miter saw turning on, free run, turn off (0:34)
10 inch Craftsman miter saw turning on, running and cutting spruce at 45 degrees, then off (0:21)
10 inch Craftsman miter saw turning on, running and cutting spruce at 45 degrees, then off (0:21)
10 inch Craftsman miter saw turning on, running and cutting upright wood at 45 degrees, then off (0:17)
10 inch Craftsman miter saw turning on, running and cutting upright wood at 90 degrees, then off in the distance (0:19)
10 inch Craftsman miter saw turning on, running and cutting wood at 45 degrees, then off (0:14)
10 inch Craftsman miter saw turning on, running and cutting wood at 90 degrees, then off (0:12)
10 inch delta miter saw turning on, free run, then off (0:42)
10 inch delta miter saw turning on, running and cutting spruce at 45 degrees, then off (0:19)
10 inch delta miter saw turning on, running and cutting spruce at 90 degrees, then off 1 (0:13)
10 inch delta miter saw turning on, running and cutting upright wood at 45 degrees, then off (0:15)
10 inch delta miter saw turning on, running and cutting upright wood at 90 degrees, then off (0:13)
10 inch delta miter saw turning on, running and cutting wood at 45 degrees, then off (0:14)
10 inch delta miter saw turning on, running and cutting wood at 90 degrees, then off (0:13)
120 grit sandpaper sanding pine steady and fast (0:10)
120 grit sandpaper sanding pine steady and slow (0:11)
13 inch thickness planer cutting with texture and turning off (1:10)
13 inch thickness planer turning on and idling then turning off (0:37)
14 inch Jack hand saw cutting wood slowly (0:10)
14 inch Jack hand saw cutting wood slowly with focus (0:12)
18 gauge brad nailer closing a cartridge (0:01)
18 gauge brad nailer loading and unloading (0:05)
18 gauge brad nailer nailing many times slowly (0:11)
20 gallon air compressor air release x2 (0:02)
20 gallon air compressor on, run, and turn off (3:23)
20 gallon air compressor on, run, and turn off in the distance (3:23)
320 grit sandpaper sanding pine steady and slow (0:12)
320 grit sandpaper sanding pine steady, fast, and varied (0:18)
400 grit sandpaper sanding pine steady and fast (0:12)
400 grit sandpaper sanding pine steady and slow (0:09)
6 inch jointer on, free run, then off (0:43)
6 inch jointer on, run, cutting fir with a face joint and 1/16 cut, then off (0:27)
6 inch jointer on, run, cutting fir with a face joint and 1/64 cut, then off (0:21)
6 inch jointer on, run, cutting fir with an edge joint and 1/16 cut, then off (0:23)
6 inch jointer on, run, cutting fir with an edge joint and 1/64 cut, then off (0:24)
6 inch jointer on, run, cutting fir with an edge joint and 1/8 cut, then off 1 (0:28)
6 inch jointer on, run, cutting hardwood with an edge joint and 1/16 cut, then off (0:20)
6 inch jointer on, run, cutting long pine board with an edge joint and 1/16 cut, then off 1 (0:24)
6 inch jointer on, run, cutting long pine board with an edge joint and 1/64 cut, then off (0:30)
6 inch jointer on, run, cutting long pine board with an edge joint and 1/8 cut, then off (0:25)
6 inch jointer on, run, cutting maple with an edge joint and 1/16 cut, then off (0:31)
6 inch jointer on, run, cutting maple with an edge joint and 1/64 cut, then off (0:26)
6 inch jointer on, run, cutting maple with an edge joint and 1/8 cut, then off (0:32)
6 inch jointer on, run, cutting oak with a face joint and 1/16 cut, then off (0:36)
6 inch jointer on, run, cutting oak with a face joint and 1/64 cut, then off (0:41)
6 inch jointer on, run, cutting oak with a face joint and 1/8 cut, then off (0:52)
6 inch jointer on, run, cutting pine with a face joint and 1/64 cut, then off (0:23)
6 inch jointer on, run, cutting pine with a face joint and 1/8 cut, then off (0:30)
6 inch jointer on, run, cutting pine with an edge joint and 1/16 cut, then off (0:23)
6 inch jointer on, run, cutting pine with an edge joint and 1/8 cut, then off 1 (0:23)
6 inch jointer on, run, cutting spruce with a face joint and 1/16 cut, then off (0:28)
6 inch jointer on, run, cutting spruce with a face joint and 1/64 cut, then off (0:20)
6 inch jointer on, run, cutting spruce with a face joint and 1/8 cut, then off 1 (0:28)
6 inch jointer on, run, cutting spruce with an edge joint and 1/16 cut, then off (0:23)
6 inch jointer on, run, cutting spruce with an edge joint and 1/64 cut, then off (0:21)
6 inch jointer on, run, cutting spruce with an edge joint and 1/64 quick cut, then off (0:12)
6 inch jointer on, run, cutting spruce with an edge joint and 1/8 cut, then off (0:23)
60 grit sandpaper sanding pine steady and fast (0:10)
60 grit sandpaper sanding pine steady and slow (0:13)
80 grit sandpaper sanding pine steady and fast (0:08)
80 grit sandpaper sanding pine steady and slow (0:12)
Air burst as a hose disconnects with a release and hiss and a simple blast (0:01)
Air burst as a hose disconnects with a release and hiss and slow blast
Air burst as a hose disconnects with a release and hiss and squeaky blast (0:01)
Air compressor starting and running steadily, close (0:28)
Air compressor turning on and running and turning off 1 (0:27)
Angle grinder turn on and working on metal railing in spurts (0:43)
Angle grinder turning on and grinding angle iron with an abrasive disc then turning off (0:39)
Belt sander turning on and idling then turning off (0:17)
Belt sander turning on and sanding then turning off (0:31)
Bench grinder turning on and grinding then turning off (0:44)
Bench grinder turning on and idling then turning off (0:19)
Bench thickness planer cutting pine many times and turning off (1:15)
Bicycle pump working dry fire (0:09)
Bicycle pump working with a pinched valve (0:14)
Black and Decker 850 RPM drill turn on, drill wood with 1 1/8 spade bit then off (0:22)
Black and Decker 850 RPM drill turn on, drill wood with 1 1/8 spade bit, with heavy pressure then off (0:08)
Black and Decker 850 RPM drill turn on, drill wood with 3/4 spade bit with heavy pressure, then off (0:07)
Black and Decker 850 RPM drill turn on, drill wood with 3/4 spade bit, then off (0:17)
Black and Decker 850 RPM drill turn on, free run, then off (0:37)
Boat winch payout with ratchet (0:13)
Bosch 3000 RPM drill turn on, drill wood, 3/4 spade bit with heavy pressure (0:04)
Bosch 3000 RPM drill turn on, drill wood, 3/4 spade bit with light pressure (0:08)
Bosch 3000 RPM drill turn on, free run, then turn off (0:39)
Box cutter knife blade out and in (0:16)
Box cutter knife cutting a box (0:20)
Box cutter knife cutting a box in a hurry (0:07)
Box cutter knife cutting a box raggedly (0:29)
Burnzomatic hand torch turning on and igniting and trimming and off (0:46)
Caulking gun plunger releasing in a complex manner (0:03)
Caulking gun plunger releasing while pulling back 2 (0:02)
Caulking gun trigger squeezing x1 and squirting caulking with a shudder (0:02)
Caulking gun trigger with no tube squeezing many times playfully (0:05)
Caulking gun tube removing
Caulking gun tube setting in and brushing (0:01)
Chainsaw starting and cutting hardwood x3 then turning off (0:45)
Chainsaw starting and idling and revving then turning off (0:32)
Circular saw sliding the guard and then releasing (0:02)
Circular saw turning on and cutting then turning off (0:14)
Circular saw turning on and idling then turning off (0:25)
Circular saw with 16 tooth blade turning on and cutting plywood then turning off (0:20)
Concrete drill from inside working steadily 1, in the distance (0:49)
Concrete saw cutting steadily and intensely in the distance (0:20)
Concrete saw idling and working three times then off in the distance (2:03)
Construction in a house working on drywall and drilling 1 (1:33)
Cordless DeWalt drill drilling wood at high speed, long, short, short (0:18)
Cordless DeWalt drill drilling wood at low speed (0:13)
Cordless DeWalt drill drilling wood at low speed, steadily and rotating drill to clean out hole in the distance (0:12)
Cordless DeWalt drill setting on wood with no traction (0:15)
Cordless Ryobi drill removing screw and accelerating to an abrupt stop (0:03)
Cordless Ryobi drill removing screw and skipping insistently (0:06)
Cordless Ryobi drill removing screw x5, various (0:12)
Cordless Ryobi drill revving twice, speedy
Cordless Ryobi drill tightening chuck recklessly (0:03)
Craftex brad nailer firing crown staples into hardwood quickly many times (0:13)
Craftex brad nailer opening cartridge and inserting nails then closing cartridge 1 (0:04)
Craftex brad nailer opening cartridge and removing nails then closing cartridge 1 (0:04)
Demolition hammer turn on, working on concrete deep and solid, then turn off (0:39)
Demolition hammer turn on, working on concrete in small spurts, grow, diminish, then off (3:44)
Demolition hammer turn on, working on concrete in spurts, embolden, then off (2:16)
Demolition hammer turn on, working on concrete steady and short (0:12)
Demolition hammer working on concrete and metal with a tonal grind (1:39)
Demolition hammer working on concrete in cautious spurts, then off (0:26)
Demolition hammer working on concrete in random spurts, then off (0:29)
Demolition hammer working on concrete in short spurts with a whirr, and a clicky trigger (4:28)
Demolition hammer working on concrete in short spurts with a whirr, brief (0:31)
Demolition hammer working on concrete in short spurts with a whirr, long (3:42)
Dremel turning on and cutting metal high speed and turning off (0:33)
Dremel turning on and cutting metal medium speed with an alternate blade (0:25)
Dremel turning on and cutting thick metal medium speed and turning off (0:32)
Dremel turning on and idling at fast speed then turning off (0:16)
Drill fastening screw into drywall frame easily in the medium distance x2 (0:04)
Drill fastening screw into drywall frame long and steady in the distance (0:15)
Drill fastening screw into drywall frame long then short in the distance (0:18)
Drill fastening screw into drywall frame with a metal scrape in the medium distance (0:04)
Drum sander turning on and sanding hardwood with many passes then turning off (1:12)
Framing hammer hitting galvanized nail into wood x4 (0:02)
Framing hammer hitting galvanized nail into wood x6 (0:04)
Framing hammer hitting galvanized nail into wood x6, varied (0:04)
Gas hedge trimmer running in the distance with a wide recording pattern (0:17)
Gas hedge trimmers running with swells at various distances 1 (2:29)
Gas weed wacker working and moving away in the distance (0:45)
Hammer hitting plaster and exploring in the distance (0:09)
Hammer hitting plaster and wood tentatively (0:15)
Hammer hitting plaster and wood tentatively and lightly (0:09)
Hammer hitting strongly and diminishing (0:05)
Hammering nail medium strong, x2 (0:06)
Hammering nail various hard, x2 (0:11)
Hand held power planer turning on and idling steadily then turning off (0:20)
Hand held power planer turning on and running shallowly and then turning off (0:14)
Hand held power planer turning on and running with texture and then turning off 2 (0:17)
Impact wrench turning on and idling and off (0:09)
Impact wrench turning on and idling with revs and off (0:09)
Impact wrench turning on and loosening a 7 16 inch bolt in bursts and off (0:07)
Impact wrench turning on and tightening a 7 16 inch bolt in bursts and off twice (0:06)
Impact wrench turning on and tightening a 7 16 inch bolt with some skipping and turning off (0:05)
Japanese Dozuki hand saw cutting wood hard (0:05)
Japanese Dozuki hand saw cutting wood quickly (0:06)
Jigsaw turning on and cutting an angle iron at high speed then off (0:42)
Jigsaw turning on and cutting sheet metal at high speed than off (0:15)
Jigsaw turning on and cutting sheet metal at slow speed and off (0:16)
Jigsaw with a blade for wood turning on and cutting plywood at medium speed and turning off (0:13)
Jigsaw with a blade for wood turning on and idling at medium speed then turning off (0:18)
Lathe turning on and idling with crossfeed disengaged then turning off (0:28)
Lathe turning on and spinning a sand metal rod (0:06)
Lathe turning on and turning a tube of steel with crossfeed engaged at medium speed then turning off (1:14)
Leaf blower running in vacuum mode and crunching leaves in the medium distance (1:35)
Leaf blower Stihl electric BE55 turning on and working at low speed and traveling and turning off (0:36)
Lever come along winch payout fast and steady (0:09)
Lever come along winch payout slow (0:05)
Lever come along winch payout slow (0:23)
Lever come along winch payout slow and accelerating (0:21)
Lever come along winch payout with a struggle, then metal block hit (0:03)
Long Weston hand saw cutting wood fast and brisk (0:09)
Long Weston hand saw cutting wood slowly with power, rhythmically (0:17)
One-quarter sheet sander turning on and idling then turning off (0:16)
One-quarter sheet sander turning on and sanding hardwood in swipes then turning off (0:34)
Orbital sander turning on and idling and sanding at high speed then turning off (0:49)
Orbital sander turning on and idling and sanding then turning off (0:40)
Plunger in sink working fast and frantically (0:02)
Plunger in sink working fast and messily (0:02)
Plunger in sink working slowly and heavily from under the sink perspective (0:13)
Plunger in sink working three times glorpy and watery (0:02)
Pneumatic 1/4 inch die grinder turning on and grinding metal long and varied then turning off (0:30)
Pneumatic 1/4 inch die grinder turning on and idling at fast speed then turning off (0:19)
Pneumatic 1/4 inch die grinder turning on and idling at slow speed then turning off (0:11)
Pneumatic air impact wrench removing a bolt and turning off (0:05)
Pneumatic air impact wrench tightening a bolt and turning off (0:04)
Pneumatic air impact wrench turning on, revving and idling at high speed then turning off (0:07)
Pneumatic air impact wrench turning on, revving and idling at slow speed then turning off (0:04)
Pneumatic air ratchet turning on and idling at slow speed then turning off 2 (0:08)
Pneumatic air ratchet turning on and idling then turning off 1 (0:04)
Pneumatic air ratchet turning on and removing bolt then turning off (0:09)
Pneumatic air ratchet turning on and tightening bolt then turning off (0:07)
Pneumatic air valve releasing (0:01)
Pneumatic air valve releasing breathily (0:01)
Pneumatic butterfly impact wrench removing a bolt revving (0:08)
Pneumatic butterfly impact wrench removing a bolt tightening a bolt (0:02)
Pneumatic butterfly impact wrench removing a bolt twice (0:01)
Pneumatic drill turning on and drilling steel then turning off (0:19)
Pneumatic drill turning on and drilling then turning off (0:07)
Pneumatic drill turning on and idling at low speed and turning off (0:07)
Propane hand torch turning on and igniting then burning and off 1 (0:05)
Propane hand torch turning on and igniting then burning high and harsh then off (0:01)
Propane hand torch turning on and igniting then burning thinly and frantically then off (0:38)
Propane roofer torch burning constantly and thickly with swishes 1 (0:39)
Propane roofer torch burning constantly with a sizzle (0:22)
Propane roofer torch burning with a stutter (0:08)
Propane weed torch igniting flame and turning off 1 (0:19)
Propane weed torch turning on with gas hissing then turning off (0:10)
Reciprocating saw cutting and carving a wood door in the distance (0:40)
Reciprocating saw idling and revving then turning off (0:18)
Reciprocating saw turning on and cutting a spruce 2 x 4 then turning off (0:22)
Reciprocating saw with a metal blade turning on and cutting quarter inch angle iron then turning off (0:34)
Sawzall saw cutting wood and plaster aggressively (0:17)
Sawzall saw cutting wood and plaster skipping to steady (0:25)
Sawzall saw cutting wood and plaster with a fluttering skid in the distance (0:15)
Shopmate bench grinder turning on and grinding with wire wheel then turning off (0:49)
Shopmate bench grinder turning on and idling and grinding then turning off (0:58)
Small and slick ratchet working in the distance (0:11)
Small angle grinder turning on and grinding angle iron with an abrasive wheel then turning off (0:22)
Small angle grinder turning on and idling and turning off (0:18)
Small orbital sander turning on and sanding then turning off (0:53)
Stihl 14 inch abrasive chop saw cutting idling (0:20)
Stihl 14 inch abrasive chop saw cutting metal bar once, short (0:15)
Stihl 14 inch abrasive chop saw cutting metal bar twice then idling (0:39)
Stihl 14 inch abrasive chop saw cutting metal bar with revs, various (1:45)
Stihl 14 inch abrasive chop saw cutting metal strong then diminishing, cutting through bar (0:43)
Stihl 14 inch abrasive chop saw cutting thin metal bar four times (1:18)
Table mount router cutting (0:22)
Table mount router turning on and cutting aggressively then turning off (0:16)
Table mount router turning on and cutting softwood wile grinding then turning off (0:49)
Table mount router with a round overbit turning on and idling then turning off (0:24)
Table saw with a 10 inch blade turning on and ripping a spruce 2 x 4 twice and turning off (0:50)
Table saw with a 10 inch blade turning on and ripping one inch piece of maple hardwood then turning off (0:33)
Tape measure pulling and releasing and feeding in a series (0:11)
Tape measure spooling out and releasing in a series (0:27)
Tiny hand ratchet clicking in a circuit x2 (0:04)
Tire gauge air hiss checking tire pressure 1
Work hammering a concrete block wall with debris, steady and slow (0:19)
Work shovelling concrete debris steadily, hauling (1:09)
Work with a pair hammering a concrete block wall with debris patiently (1:26)
Workmate metal work bench collapsing clumsily (0:08)
Workmate metal work bench folding legs in and out in a series (0:21)
Workmate metal work bench rollers in quickly (0:10)
Workmate metal work bench rollers out (0:11)
Zip tie affixing and zipping up quickly x4 (0:12)
Zip tie affixing and zipping up x3 (0:15)
Zip tie affixing fast and zipping up deeply (0:01)
Zip tie affixing slowly and zipping up with a stutter (0:10)
10 inch Craftsman miter saw turning on, running and cutting spruce at 45 degrees, then off (0:21)
10 inch Craftsman miter saw turning on, running and cutting spruce at 45 degrees, then off (0:21)
10 inch Craftsman miter saw turning on, running and cutting upright wood at 45 degrees, then off (0:17)
10 inch Craftsman miter saw turning on, running and cutting upright wood at 90 degrees, then off in the distance (0:19)
10 inch Craftsman miter saw turning on, running and cutting wood at 45 degrees, then off (0:14)
10 inch Craftsman miter saw turning on, running and cutting wood at 90 degrees, then off (0:12)
10 inch delta miter saw turning on, free run, then off (0:42)
10 inch delta miter saw turning on, running and cutting spruce at 45 degrees, then off (0:19)
10 inch delta miter saw turning on, running and cutting spruce at 90 degrees, then off 1 (0:13)
10 inch delta miter saw turning on, running and cutting upright wood at 45 degrees, then off (0:15)
10 inch delta miter saw turning on, running and cutting upright wood at 90 degrees, then off (0:13)
10 inch delta miter saw turning on, running and cutting wood at 45 degrees, then off (0:14)
10 inch delta miter saw turning on, running and cutting wood at 90 degrees, then off (0:13)
120 grit sandpaper sanding pine steady and fast (0:10)
120 grit sandpaper sanding pine steady and slow (0:11)
13 inch thickness planer cutting with texture and turning off (1:10)
13 inch thickness planer turning on and idling then turning off (0:37)
14 inch Jack hand saw cutting wood slowly (0:10)
14 inch Jack hand saw cutting wood slowly with focus (0:12)
18 gauge brad nailer closing a cartridge (0:01)
18 gauge brad nailer loading and unloading (0:05)
18 gauge brad nailer nailing many times slowly (0:11)
20 gallon air compressor air release x2 (0:02)
20 gallon air compressor on, run, and turn off (3:23)
20 gallon air compressor on, run, and turn off in the distance (3:23)
320 grit sandpaper sanding pine steady and slow (0:12)
320 grit sandpaper sanding pine steady, fast, and varied (0:18)
400 grit sandpaper sanding pine steady and fast (0:12)
400 grit sandpaper sanding pine steady and slow (0:09)
6 inch jointer on, free run, then off (0:43)
6 inch jointer on, run, cutting fir with a face joint and 1/16 cut, then off (0:27)
6 inch jointer on, run, cutting fir with a face joint and 1/64 cut, then off (0:21)
6 inch jointer on, run, cutting fir with an edge joint and 1/16 cut, then off (0:23)
6 inch jointer on, run, cutting fir with an edge joint and 1/64 cut, then off (0:24)
6 inch jointer on, run, cutting fir with an edge joint and 1/8 cut, then off 1 (0:28)
6 inch jointer on, run, cutting hardwood with an edge joint and 1/16 cut, then off (0:20)
6 inch jointer on, run, cutting long pine board with an edge joint and 1/16 cut, then off 1 (0:24)
6 inch jointer on, run, cutting long pine board with an edge joint and 1/64 cut, then off (0:30)
6 inch jointer on, run, cutting long pine board with an edge joint and 1/8 cut, then off (0:25)
6 inch jointer on, run, cutting maple with an edge joint and 1/16 cut, then off (0:31)
6 inch jointer on, run, cutting maple with an edge joint and 1/64 cut, then off (0:26)
6 inch jointer on, run, cutting maple with an edge joint and 1/8 cut, then off (0:32)
6 inch jointer on, run, cutting oak with a face joint and 1/16 cut, then off (0:36)
6 inch jointer on, run, cutting oak with a face joint and 1/64 cut, then off (0:41)
6 inch jointer on, run, cutting oak with a face joint and 1/8 cut, then off (0:52)
6 inch jointer on, run, cutting pine with a face joint and 1/64 cut, then off (0:23)
6 inch jointer on, run, cutting pine with a face joint and 1/8 cut, then off (0:30)
6 inch jointer on, run, cutting pine with an edge joint and 1/16 cut, then off (0:23)
6 inch jointer on, run, cutting pine with an edge joint and 1/8 cut, then off 1 (0:23)
6 inch jointer on, run, cutting spruce with a face joint and 1/16 cut, then off (0:28)
6 inch jointer on, run, cutting spruce with a face joint and 1/64 cut, then off (0:20)
6 inch jointer on, run, cutting spruce with a face joint and 1/8 cut, then off 1 (0:28)
6 inch jointer on, run, cutting spruce with an edge joint and 1/16 cut, then off (0:23)
6 inch jointer on, run, cutting spruce with an edge joint and 1/64 cut, then off (0:21)
6 inch jointer on, run, cutting spruce with an edge joint and 1/64 quick cut, then off (0:12)
6 inch jointer on, run, cutting spruce with an edge joint and 1/8 cut, then off (0:23)
60 grit sandpaper sanding pine steady and fast (0:10)
60 grit sandpaper sanding pine steady and slow (0:13)
80 grit sandpaper sanding pine steady and fast (0:08)
80 grit sandpaper sanding pine steady and slow (0:12)
Air burst as a hose disconnects with a release and hiss and a simple blast (0:01)
Air burst as a hose disconnects with a release and hiss and slow blast
Air burst as a hose disconnects with a release and hiss and squeaky blast (0:01)
Air compressor starting and running steadily, close (0:28)
Air compressor turning on and running and turning off 1 (0:27)
Angle grinder turn on and working on metal railing in spurts (0:43)
Angle grinder turning on and grinding angle iron with an abrasive disc then turning off (0:39)
Belt sander turning on and idling then turning off (0:17)
Belt sander turning on and sanding then turning off (0:31)
Bench grinder turning on and grinding then turning off (0:44)
Bench grinder turning on and idling then turning off (0:19)
Bench thickness planer cutting pine many times and turning off (1:15)
Bicycle pump working dry fire (0:09)
Bicycle pump working with a pinched valve (0:14)
Black and Decker 850 RPM drill turn on, drill wood with 1 1/8 spade bit then off (0:22)
Black and Decker 850 RPM drill turn on, drill wood with 1 1/8 spade bit, with heavy pressure then off (0:08)
Black and Decker 850 RPM drill turn on, drill wood with 3/4 spade bit with heavy pressure, then off (0:07)
Black and Decker 850 RPM drill turn on, drill wood with 3/4 spade bit, then off (0:17)
Black and Decker 850 RPM drill turn on, free run, then off (0:37)
Boat winch payout with ratchet (0:13)
Bosch 3000 RPM drill turn on, drill wood, 3/4 spade bit with heavy pressure (0:04)
Bosch 3000 RPM drill turn on, drill wood, 3/4 spade bit with light pressure (0:08)
Bosch 3000 RPM drill turn on, free run, then turn off (0:39)
Box cutter knife blade out and in (0:16)
Box cutter knife cutting a box (0:20)
Box cutter knife cutting a box in a hurry (0:07)
Box cutter knife cutting a box raggedly (0:29)
Burnzomatic hand torch turning on and igniting and trimming and off (0:46)
Caulking gun plunger releasing in a complex manner (0:03)
Caulking gun plunger releasing while pulling back 2 (0:02)
Caulking gun trigger squeezing x1 and squirting caulking with a shudder (0:02)
Caulking gun trigger with no tube squeezing many times playfully (0:05)
Caulking gun tube removing
Caulking gun tube setting in and brushing (0:01)
Chainsaw starting and cutting hardwood x3 then turning off (0:45)
Chainsaw starting and idling and revving then turning off (0:32)
Circular saw sliding the guard and then releasing (0:02)
Circular saw turning on and cutting then turning off (0:14)
Circular saw turning on and idling then turning off (0:25)
Circular saw with 16 tooth blade turning on and cutting plywood then turning off (0:20)
Concrete drill from inside working steadily 1, in the distance (0:49)
Concrete saw cutting steadily and intensely in the distance (0:20)
Concrete saw idling and working three times then off in the distance (2:03)
Construction in a house working on drywall and drilling 1 (1:33)
Cordless DeWalt drill drilling wood at high speed, long, short, short (0:18)
Cordless DeWalt drill drilling wood at low speed (0:13)
Cordless DeWalt drill drilling wood at low speed, steadily and rotating drill to clean out hole in the distance (0:12)
Cordless DeWalt drill setting on wood with no traction (0:15)
Cordless Ryobi drill removing screw and accelerating to an abrupt stop (0:03)
Cordless Ryobi drill removing screw and skipping insistently (0:06)
Cordless Ryobi drill removing screw x5, various (0:12)
Cordless Ryobi drill revving twice, speedy
Cordless Ryobi drill tightening chuck recklessly (0:03)
Craftex brad nailer firing crown staples into hardwood quickly many times (0:13)
Craftex brad nailer opening cartridge and inserting nails then closing cartridge 1 (0:04)
Craftex brad nailer opening cartridge and removing nails then closing cartridge 1 (0:04)
Demolition hammer turn on, working on concrete deep and solid, then turn off (0:39)
Demolition hammer turn on, working on concrete in small spurts, grow, diminish, then off (3:44)
Demolition hammer turn on, working on concrete in spurts, embolden, then off (2:16)
Demolition hammer turn on, working on concrete steady and short (0:12)
Demolition hammer working on concrete and metal with a tonal grind (1:39)
Demolition hammer working on concrete in cautious spurts, then off (0:26)
Demolition hammer working on concrete in random spurts, then off (0:29)
Demolition hammer working on concrete in short spurts with a whirr, and a clicky trigger (4:28)
Demolition hammer working on concrete in short spurts with a whirr, brief (0:31)
Demolition hammer working on concrete in short spurts with a whirr, long (3:42)
Dremel turning on and cutting metal high speed and turning off (0:33)
Dremel turning on and cutting metal medium speed with an alternate blade (0:25)
Dremel turning on and cutting thick metal medium speed and turning off (0:32)
Dremel turning on and idling at fast speed then turning off (0:16)
Drill fastening screw into drywall frame easily in the medium distance x2 (0:04)
Drill fastening screw into drywall frame long and steady in the distance (0:15)
Drill fastening screw into drywall frame long then short in the distance (0:18)
Drill fastening screw into drywall frame with a metal scrape in the medium distance (0:04)
Drum sander turning on and sanding hardwood with many passes then turning off (1:12)
Framing hammer hitting galvanized nail into wood x4 (0:02)
Framing hammer hitting galvanized nail into wood x6 (0:04)
Framing hammer hitting galvanized nail into wood x6, varied (0:04)
Gas hedge trimmer running in the distance with a wide recording pattern (0:17)
Gas hedge trimmers running with swells at various distances 1 (2:29)
Gas weed wacker working and moving away in the distance (0:45)
Hammer hitting plaster and exploring in the distance (0:09)
Hammer hitting plaster and wood tentatively (0:15)
Hammer hitting plaster and wood tentatively and lightly (0:09)
Hammer hitting strongly and diminishing (0:05)
Hammering nail medium strong, x2 (0:06)
Hammering nail various hard, x2 (0:11)
Hand held power planer turning on and idling steadily then turning off (0:20)
Hand held power planer turning on and running shallowly and then turning off (0:14)
Hand held power planer turning on and running with texture and then turning off 2 (0:17)
Impact wrench turning on and idling and off (0:09)
Impact wrench turning on and idling with revs and off (0:09)
Impact wrench turning on and loosening a 7 16 inch bolt in bursts and off (0:07)
Impact wrench turning on and tightening a 7 16 inch bolt in bursts and off twice (0:06)
Impact wrench turning on and tightening a 7 16 inch bolt with some skipping and turning off (0:05)
Japanese Dozuki hand saw cutting wood hard (0:05)
Japanese Dozuki hand saw cutting wood quickly (0:06)
Jigsaw turning on and cutting an angle iron at high speed then off (0:42)
Jigsaw turning on and cutting sheet metal at high speed than off (0:15)
Jigsaw turning on and cutting sheet metal at slow speed and off (0:16)
Jigsaw with a blade for wood turning on and cutting plywood at medium speed and turning off (0:13)
Jigsaw with a blade for wood turning on and idling at medium speed then turning off (0:18)
Lathe turning on and idling with crossfeed disengaged then turning off (0:28)
Lathe turning on and spinning a sand metal rod (0:06)
Lathe turning on and turning a tube of steel with crossfeed engaged at medium speed then turning off (1:14)
Leaf blower running in vacuum mode and crunching leaves in the medium distance (1:35)
Leaf blower Stihl electric BE55 turning on and working at low speed and traveling and turning off (0:36)
Lever come along winch payout fast and steady (0:09)
Lever come along winch payout slow (0:05)
Lever come along winch payout slow (0:23)
Lever come along winch payout slow and accelerating (0:21)
Lever come along winch payout with a struggle, then metal block hit (0:03)
Long Weston hand saw cutting wood fast and brisk (0:09)
Long Weston hand saw cutting wood slowly with power, rhythmically (0:17)
One-quarter sheet sander turning on and idling then turning off (0:16)
One-quarter sheet sander turning on and sanding hardwood in swipes then turning off (0:34)
Orbital sander turning on and idling and sanding at high speed then turning off (0:49)
Orbital sander turning on and idling and sanding then turning off (0:40)
Plunger in sink working fast and frantically (0:02)
Plunger in sink working fast and messily (0:02)
Plunger in sink working slowly and heavily from under the sink perspective (0:13)
Plunger in sink working three times glorpy and watery (0:02)
Pneumatic 1/4 inch die grinder turning on and grinding metal long and varied then turning off (0:30)
Pneumatic 1/4 inch die grinder turning on and idling at fast speed then turning off (0:19)
Pneumatic 1/4 inch die grinder turning on and idling at slow speed then turning off (0:11)
Pneumatic air impact wrench removing a bolt and turning off (0:05)
Pneumatic air impact wrench tightening a bolt and turning off (0:04)
Pneumatic air impact wrench turning on, revving and idling at high speed then turning off (0:07)
Pneumatic air impact wrench turning on, revving and idling at slow speed then turning off (0:04)
Pneumatic air ratchet turning on and idling at slow speed then turning off 2 (0:08)
Pneumatic air ratchet turning on and idling then turning off 1 (0:04)
Pneumatic air ratchet turning on and removing bolt then turning off (0:09)
Pneumatic air ratchet turning on and tightening bolt then turning off (0:07)
Pneumatic air valve releasing (0:01)
Pneumatic air valve releasing breathily (0:01)
Pneumatic butterfly impact wrench removing a bolt revving (0:08)
Pneumatic butterfly impact wrench removing a bolt tightening a bolt (0:02)
Pneumatic butterfly impact wrench removing a bolt twice (0:01)
Pneumatic drill turning on and drilling steel then turning off (0:19)
Pneumatic drill turning on and drilling then turning off (0:07)
Pneumatic drill turning on and idling at low speed and turning off (0:07)
Propane hand torch turning on and igniting then burning and off 1 (0:05)
Propane hand torch turning on and igniting then burning high and harsh then off (0:01)
Propane hand torch turning on and igniting then burning thinly and frantically then off (0:38)
Propane roofer torch burning constantly and thickly with swishes 1 (0:39)
Propane roofer torch burning constantly with a sizzle (0:22)
Propane roofer torch burning with a stutter (0:08)
Propane weed torch igniting flame and turning off 1 (0:19)
Propane weed torch turning on with gas hissing then turning off (0:10)
Reciprocating saw cutting and carving a wood door in the distance (0:40)
Reciprocating saw idling and revving then turning off (0:18)
Reciprocating saw turning on and cutting a spruce 2 x 4 then turning off (0:22)
Reciprocating saw with a metal blade turning on and cutting quarter inch angle iron then turning off (0:34)
Sawzall saw cutting wood and plaster aggressively (0:17)
Sawzall saw cutting wood and plaster skipping to steady (0:25)
Sawzall saw cutting wood and plaster with a fluttering skid in the distance (0:15)
Shopmate bench grinder turning on and grinding with wire wheel then turning off (0:49)
Shopmate bench grinder turning on and idling and grinding then turning off (0:58)
Small and slick ratchet working in the distance (0:11)
Small angle grinder turning on and grinding angle iron with an abrasive wheel then turning off (0:22)
Small angle grinder turning on and idling and turning off (0:18)
Small orbital sander turning on and sanding then turning off (0:53)
Stihl 14 inch abrasive chop saw cutting idling (0:20)
Stihl 14 inch abrasive chop saw cutting metal bar once, short (0:15)
Stihl 14 inch abrasive chop saw cutting metal bar twice then idling (0:39)
Stihl 14 inch abrasive chop saw cutting metal bar with revs, various (1:45)
Stihl 14 inch abrasive chop saw cutting metal strong then diminishing, cutting through bar (0:43)
Stihl 14 inch abrasive chop saw cutting thin metal bar four times (1:18)
Table mount router cutting (0:22)
Table mount router turning on and cutting aggressively then turning off (0:16)
Table mount router turning on and cutting softwood wile grinding then turning off (0:49)
Table mount router with a round overbit turning on and idling then turning off (0:24)
Table saw with a 10 inch blade turning on and ripping a spruce 2 x 4 twice and turning off (0:50)
Table saw with a 10 inch blade turning on and ripping one inch piece of maple hardwood then turning off (0:33)
Tape measure pulling and releasing and feeding in a series (0:11)
Tape measure spooling out and releasing in a series (0:27)
Tiny hand ratchet clicking in a circuit x2 (0:04)
Tire gauge air hiss checking tire pressure 1
Work hammering a concrete block wall with debris, steady and slow (0:19)
Work shovelling concrete debris steadily, hauling (1:09)
Work with a pair hammering a concrete block wall with debris patiently (1:26)
Workmate metal work bench collapsing clumsily (0:08)
Workmate metal work bench folding legs in and out in a series (0:21)
Workmate metal work bench rollers in quickly (0:10)
Workmate metal work bench rollers out (0:11)
Zip tie affixing and zipping up quickly x4 (0:12)
Zip tie affixing and zipping up x3 (0:15)
Zip tie affixing fast and zipping up deeply (0:01)
Zip tie affixing slowly and zipping up with a stutter (0:10)
Reviews
There are no reviews yet!